The Simple Socket Chelsea offers the end user two possible methods to start a transaction: either via scanning the QR code or via Mobile App. The charge point does not have an RFID reader or a card payment terminal. The duration of a charging session depends on two factors: the maximum charging power (kW) and the battery capacity (kWh). Charging can be stopped at any time.
To start a charging session:
- Park next to an available charge point. A blue LED light on the charge point will indicate that it is available.
- Start the charging session either via QR code or mobile application.
- Plug a standard type 2 charging cable into the charge point socket and into the car.
- The LED light will start to flash orange for a few seconds and then change to a solid orange.
- Authorise a payment or provide payment details if necessary.
- When the charging process starts, the LED light will flash green. Please note that the charging session will not start if the car is unlocked.
To finish a charging session:
- Stop the charging session on the Mobile App or via the car then unplug the cable from the car.
- Wait until the Simple Socket’s LED light is orange.
- The plug at the charge point is now unlocked and can be pulled out.
LED light colour key:
| Blue = CP available for charging. |
| Orange (solid) = Cable is plugged in and CP is waiting for authorisation Orange (flashing) = Cable is plugged in and CP is trying to establish online connection |
| Green (solid) = Connection is established but charging has not yet started Green (flashing) = Charging is in progress |
| Red (after flashing orange) = The CP couldn’t establish connection. Unplug and try again. Red during charging session = There is a potential issue with the power supply and the car charging settings need to be checked. |
| Black = CP switched off for maintenance. |
